User manual

Audio Authority
®
Model HMX-244 User Manual 5
HMX-244
VIDEO MATRIX
1 2 3 4
ZONE 1
OFF
1 2 3 4
ZONE 2
OFF
1 2 3 4
ZONE 3
OFF
1 2 3 4
ZONE 4
OFF
AUTOPOWER
ZONE
REMOTE CONTROL
HMX-244 VIDEO MATRIX
1 4
2 3
SELECT
SOURCE
1 2 3 4
POWERIR
Model 1380R HDMI UTP Receiver
DDC
B
TMDS
A
HDMI OUTPUT5V DC
POWER
RS-232
IR IN
SOURCE
1380R FRONT AND BACK PANELS A Infrared Receiver - accepts commands from IR remote controls B Power indicator light - shows power on or off status for zone receiver C Selected Source Indicator Light - indicates the selected source in the zone D Source button - push to select source in this zone E Power Switch - turns zone receiver off or on F Power Jack - connect included 5V, 2A power supply G IR Input Jack - connect Model 804-052 IR receiver (sold separately) to
send IR signals over Cat 5 to HMX-244 matrix
H HDMI Zone Output - connect directly to display or audio system I Cat 5e/6 cables connected to HMX-244 zone output. Either TIA/EIA 568A
or 568B standards may be used provided it is straight through and not crossover.
J Serial port connection *Not Used* 1380R IR REMOTE K IR remote control source selection buttons
A B C D
K
E
G
F
JIH
1 2 3 4
POWERIR
Model 1380R HDMI UTP Receiver
DDC
B
TMDS
A
HDMI OUTPUT5V DC
POWER
RS-232
IR IN
SOURCE
Note: Use only 5V demodulated IR receivers such as Model 804-052 (sold separately) IR Receiver pinout Tip = +5 Volts Ring = Data Sleeve = Ground IR Emitter pinout Tip = Signal Sleeve = Ground