User manual

10 Audio Authority HLX Series User Manual
RF signals
sent to
Base Station
1 2 3 4 5 6
RF Remote
for Zone 1
CAT 5
ZONE
RECEIVER
RF BASE STATION
RF Base Station (or Wired Keypad System)
The IR IN jack on HLX zone cards allows controllers at the head end to mimic sending commands from the zones.
A B
IR OUTIR IN
+12V
OFF
1
ZONE 1 IR OUTPUT
DO NOT TURN
ON IR +12V
SWITCH IN THIS
APPLICATION
1 2 3 4 5 6
IR CONTROLLER
CAT 5
CONNECTING
BLOCK
TV
IR EMITTER
IR EMITTER
RECEIVER
ZONE
RECEIVER
IR Control to Zones
An IR controller connected to the HLX IR OUT jack can send IR to the zone. The , or powered with 12 volts from the
HLX. To enable HLX power, move the OUT dip switch to the down position to power a compatible IR receiver in the
zone. CAUTION: Can cause damage if used with incompatible IR equipment. Check voltage and pinout.
DO NOT TURN
ON IR +12V
SWITCH IN THIS
APPLICATION