High Definition Cat 5 Matrix Specification Sheet

Any Source,
Any Display,
Any Time.
The 1172 Audio Interface is a breakout adapter that allows the easy
connection of whole-house audio amplifier components. It provides digital
and analog audio to independent audio systems with integrated switching
or systems with dedicated zone amplifiers. Connects via internal system bus
cable and four jack screws.
Interface with an Audio Distribution System
Add Remote Zones
Expand and Extend the AVAtrix
The 1176 HD Cat 5 Matrix Router expands an AVAtrix system to allow six
additional matrix outputs. Add up to five 1176s to the AVX-562 to increase
the total outputs to 36 remote locations. Connects via internal system bus
cable and four jack screws.
2048 Mercer Road, Lexington, KY 40511-1071 USA
Phone: [phone] • Fax: [phone]
Customer Toll-Free USA & Canada: 800-322-8346
www.audioauthority.com
Bus Cable for Adding More than Two Expanders
The AVAtrix has an internal ribbon bus cable that allows for two expanders
(802-567). If you plan to add three to five expanders, the seven-port
802-568 bus cable is required.
Send IR Signals to or from the Head End
The 1109 IR Injector allows IR control signals to be sent from a device
near the AVAtrix out to IR emitters connected to wallplate/receiver jacks.
Connections for up to six wallplate/receivers with each pathway operating
independently to enable a mix of incoming and outgoing IR signals. Requires
no power source.
AVAtrix, Audio Authority and the Double-A Symbol are trademarks or registered trademarks of Audio Authority Corporation. Copyright August, 2008.