Specifications

1.Withpowerdisconnectedfromthe2811Receiver,

connectyourIRreceiveranditspowersupplyto

astandard12VIRconnectingblock.Connecta

MONO3.5mmcablefromtheemitteroutputofthe

connectingblocktothe2811’s3.5mmIRport.

Pinoutisshown.

2.Withpowerdisconnectedfromthe2801

Transmitter,connectastandardIRemittertothe

2801’sIR3.5mmIRport.Pinoutisshown.

Tip=(+)

Sleeve=(–)

Tip = Signal

Ring = Ground

Sleeve = +12 Volts

CONNECTION

NOTE: The 2800 system may not be compatible with all IR equipment.