Specifications

Toft Audio Designs Series ATB Console ManualFor More Information, visit www.toftaudio.com

SUBMASTER FLOW DIAGRAM

A separate facility on each Submaster channel is the inclusion of a stereo Effects Return section locat-

ed directly above the 12 segment bargraph meters. Individual jack inputs are provided on the rear panel

behind the Submaster section and these are wired in stereo. This therefore adds another 16 input ca-

pability to the console in remix mode. An effects return level control (which adjusts both left and right

inputs simultaneously) is combined with a balance control which makes it possible to attenuate either

of the left or right signals in relation to each other. In the centre position the signals will be of equal

strength, but when the balance control is turned anti-clockwise (left) the right signal is attenuated by a

varying degree and when the balance control is turned clockwise (right), the left signal is attenuated by

a varying degree. This allows for adjustment if the stereo signal connected is not equally matched.

A ﬁnal facility included only on the ﬁrst 6 Submaster sections, is a master control for each of the bal-

anced auxiliary sends. This makes it possible to adjust the overall level of signal being sent, to either

a reverb (or other such signal processing device), or a headphone ampliﬁer if the auxiliary sends are

being used as a headphone cue (or foldback) system.

Reference to the Submaster module signal ﬂow diagram will help to give a better understanding of the

way in which the signal is routed.