User manual

6
7
5.0 INSTALLING THE UNIT
• Turn off the HDMI source equipment and the HDMI display device.
• Connect an HDMI extension cable between the HDMI Source and
the INPUT port of extender (no longer than 40 meters).
• Connect an HDMI extension cable between the display device and
the OUTPUT port of extender (no longer than 5 meters).
• Connect the DC power cord from the AC Adapter* to the unit and
plug the AC adapter into an active AC socket.
• Turn on the HDMI Source and HDMI Display Device.
* The 1391 may be powered via the HDMI cable, however, the source
device must supply a minimum of 200mA to the HDMI cable. Since
this may be an unreliable power source, it is recommended that the
AC Adapter provided with the unit be used.
*Note: Proper operation of HDMI Distribution Ampliers depends
on the use of high quality HDMI cables that provide low loss, high
bandwidth signal handling. The distance specication cannot be
guaranteed unless cables used throughout the system meet these
high standards.