User manual

8
9
The menu structure on the previous page shows a two-level arrangement. Press
the MENU button to enter the menu (level 1). Use the + and – buttons to move
up and down level 1 options. Press MENU to select an option. If there is only one
adjustment option, use the + and – buttons to make an adjustment. If there are
several adjustment options use the + and – buttons to move to the option you
wish to adjust, press the MENU button again to select an option and then use the
+ and – buttons to make the adjustment.
Use the MENU button to save your adjustment, then use + and – buttons to
navigate to the next adjustment or choose EXIT to save your selections and
leave the setup menu.
Reset Output Resolution
Hold down the MENU and (–) buttons to reset the 1366 to 480p (Y Pb Pr output).
For computer monitors, hold down MENU and (+) to reset to XGA resolution
(RGBHV output). Once an image is visible on the display, the resolution and
other settings may be adjusted.
5.0 TROUBLESHOOTING GUIDE
No picture on the video display–check the following:
• Check the 1366 power LED, and make certain the AC adapter is plugged in to a
working AC outlet.
• If power is present and the unit does not appear to operate, perform the Reset
Output Resolution function described above.
• Check the input and output cables loose connections, and inspect the cables
for damage, and/or substitute a known good cable.
Poor quality picture–check the following:
• Use high quality VGA and component video cables.
• Note: Many HDTV displays are not capable of displaying text as well as a
computer monitor does.
• It is always best to set the output resolution of the scaler to the native resolution
and refresh rate of the display device.
If problems persist, contact the Audio Authority Technical Service department via
email: [e-mail], or call 800-322-8346 or 859-233-4599.