User manual

6
7
4.0 OPERATING THE 1366
The 1366 is operated via an On Screen Display (OSD) menu. If you do not see a
picture on the video display after power-up, hold down the MENU and (–) buttons
to reset the 1366 to 480p. (For computer monitors, hold down MENU and (+) to
reset to XGA resolution.)
MENU LEVEL 1 MENU LEVEL 2 ADJUSTMENT
CONTRAST 0 - 100 of Contrast Level
BRIGHTNESS 0 - 100 of Brightness Level
FINETUNE
• HUE 0 - 100 of Hue Level
• SATURATION 0 - 100 of Saturation Level
• SHARPNESS 0 - 100 of Sharpness Level
• EXIT Back to 1
st
Tier
COLOR
• RED 0 - 100 of Red Color Level
• GREEN 0 - 100 of Green Color Level
• BLUE 0 - 100 of Blue Color Level
• EXIT Back to 1
st
Tier
SIZE
FULL / OVERSCAN / UNDERSCAN /
LETTERBOX / PANSCAN
OUTPUT
NATIVE / VGA / SVGA / XGA / SXGA /UXGA /
480i / 480p /
720p@60Hz / 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz / WXGA / WSXGA / WUXGA
OSD
• HPOSITION 0 - 100 of OSD Horizontal Position
• VPOSITION 0 - 100 of OSD Vertical Position
• TIMER 0 - 100 of OSD Existing Time (sec.)
• BACKGROUND 0 - 100 of OSD Transparent Level
• EXIT
Back to 1
st
Tier
INFORMATION
SOURCE (Input Interface) INPUT
(Input Resolution) OUTPUT (Output
Resolution) VERSION (Firmware
Version)
EXIT Close OSD Menu