User manual

6
7
3.2 CONNECTING THE HARDWARE
• Turn off the computer or other video source and the HDTV display.
• Connect the appropriate PC video and component video cables: first between
the source PC and the input of the 1366 and then between the 1366 output
and the component video inputs on the display. The included VGA-15 to 3-RCA
adapter is used to connect the 1366 output to component video input jacks.
• Optional: connect the bypass output of the 1366 to a computer monitor capable
of accepting the computer’s output video format.
• Plug in the provided AC adapter: first to the 1366 and then to an active AC
power outlet.
• Turn on the computer (the video source) and the HDTV. The 1366 has no power
switch and begins to function as soon as the AC adapter has been connected to
a live outlet. Observe that the power light is on.
• If no picture is displayed on power up, perform the HD reset procedure as
described in section 4.0 Operating the 1366.
VIDEO INPUT
(FEMALE DB-15)
POWER
INDICATOR
LIGHT
AC ADAPTER
CONNECTION
UP AND DOWN
CONTROLS
MENU
ENTER
AND EXIT
VIDEO BYPASS OUTPUT
(FEMALE DB-15)
VIDEO OUTPUT
(FEMALE DB-15)
PC / HD
BYPASS
DC 5V
PC / HD
OUTPUT
MENU
PC / HD
IN
480p
XGA
PC / HD
BYPASS
DC 5V
PC / HD
OUTPUT
MENU
PC / HD
IN
480p
XGA