User Guide

AUDIO FUTURA
AUDIO FUTURAAUDIO FUTURA
AUDIO FUTURA S.P.A. April 2010 | revision 1.0
USBDAC Application Note 2 / 7
The aim of this document is to give some advices about the use of the Audio Analogue products having a USBDAC inside.
At the end of the document a brief glossary reporting some of the most common words used speaking about this kind of technology.
It is not pretending to be a exhaustive and complete one but we hope is useful for who has never approached this matter. It’s our
intent to update this document for what we can…
The USBDAC function is to connect the PC or MAC to the Hi Fi system so that any sound produced by the PC/MAC will be played
by the Hi Fi system. The PC/MAC Hi Fi system connection is performed via a USB connection USB REV1.1 or USBREV2.0
compatible. The USB cable which physically implements the connection must be shorter than 3 meters. Anyway you can increase
the connection length as much as you like adding along the connection devices called “active Hubs”. There are many USB active
Hubs available on the market. If you are going to buy a one please be sure it is a USB REV2.0 compatible. To increase the USB
connection length via the active hubs doesn’t decrease the audio chain performances because the digital levels are re-generated by
the active hubs. Therefore, from the audio reproduction point of view, there is no loss in quality in the chain: “PC/MAC USB
cable Hub attivo cable USBDAC”. Of course is important that the USB cables between the active USB hubs aren’t longer
than 3meters and that the active hubs are correctly linked and working. The opportunity to increase the connection length is very
important when a PC/MAC in an other room is used instead of a laptop. Moreover remind that, for the best listening experience, is
better that the PC/MAC is placed in a room different from where the Hi Fi System is. That’s because of the noise produced by the
PC/MAC inner fan.
Once the connection PC/MAC USBDAC is performed, and the first initialization done (by which the PC/MAC load the proper
driver software ), the PC/MAC sees the USBDAC and what connected to its analog outputs as its audio board. Therefore any sound
produced by the PC/MAC, even the “system” sounds, is played by the Hi Fi system.
The next step is to use a player, that’s say a software which can read different audio formats and reproduce them. In such way all
the audio files present into the PC/MAC and all the audio files which can be downloaded from the web can be reproduced by the
PC/MAC and so will be played on the Hi Fi system. Usually both the PC and the MAC have already a player inside, and such
software is run any time a audio or video file is clicked. The players by default inside the PC and MAC, perfectly work with the Audio
Analogue USBDACs, anyway there are many others players, many of which are free. Some players are particularly interesting
because they guarantee a transparent crossing in the digital data flux. In fact, normally, the players perform some kind of digital
elaboration between the data reading and the data sending to the audio board. For the PC (Personal Computer with a Windows
operative system) the behaviour of the player in passing the data is controlled by softwares named “drivers”.
Below, a list of free players is reported, some of which are dedicated to the Mac OsX
1
and some others to the Microsoft Windows
Os
2.
At the reported web links is possible to download the software and to have information about its use and installation.
- Foobar2000 (freeware audio player for Windows): http://www.foobar2000.org/
- VLC (open source audio player for Windows and Mac): http://www.videolan.org/vlc/
- SongBird (open source audio player for Windows and Mac): http://getsongbird.com/
- Audion (free audio player and many more for Mac): https://www.panic.com/audion/index.html
- Play (open source audio player for Mac): http://sbooth.org/Play/