Specifications
ACTUATORS - INTERFACE - PRESENCE SENSOR KNX
PUSH BUTTON INTERFACE 2 IN - 2 OUT LED / PUSH BUTTON INTERFACE 4 IN - 4 OUT LED
INWALL MODULE 3 INPUT /2 OUTPUT
INWALL 8 INPUT - 4 LED OUTPUT MODULE
The product is dedicated to interface of clean contacts with 2 or 4 input channels, such as sensors, traditional buttons
and 2 or 4 low voltage/current output channels to drive LED signal indicator lamps.
-
shutter con-trol, scene recall and control, sequences of 3 objects. Analog input, can manage one temperature probe (with On/
alternatively to the temperature sensor, can manage a Infrared Receiver (IRX) in order to forward to the bus up to 8 channel coming
from a Infrared Remote Control (IRC) with on/off commands, scenes, sequences of 2 objects, dimmer and shutter. Outputs include
switching function with timed delays, stair-case function, scene recall, lock or logic function.
AD84A02KNX module includes 4 digital inputs to interface clean contacts and 4 analog or digital inputs for clean contacts or
channels to drive LED signal indicator lamps. Inputs 5 to 8, set as analog inputs, enable up to 2 temperature probes (with On/Off
threshold) and 2 thermostats to control heating and cooling equipments, valves, 2 and 4 pipes fan coils.
ORDER CODES
ORDER CODE
ORDER CODE
TECHNICAL FEATURES
TECHNICAL FEATURES
TECHNICAL FEATURES
Push Button Interface 2 IN - 2 OUT LED
Inwall Module 3 IN /2 OUT
Inwall 8 Input - 4 Led Output Module
Push Button Interface 4 IN - 4 OUT LED
IO22C02KNX
IO32D01KNX
AD84A02KNX
IO44C02KNX
Dimensions
H: 43 x W: 36 x D: 17 mm
Mounting
Fit in all standard derivation boxes: 2-3 modules rectangular and
round
Connection
Bus line: 2 bus connection terminals, max wire section: 0,8mm²
Inputs and outputs: 12-pin plug connector wired with 0,2 mm²
Dimensions
52 x 28 mm Weight: approx. 50 g
Supply
Via bus EIB/KNX cable
Voltage 21..30V DC
Current Consumption EIB/KNX < 10mA
Digital Input
For free potential contacts (dry contacts)
Voltage Scanning: 3,3 V DC (internally Generated)
AWG24 cables with 1800 mm length
Analog Input for temperature probe
For NTC temperature probe eelectron code
TS01A01ACC (range from -20°C to +100°C)
TS01B01ACC (range from -50°C to +60°C)
Dimensions
H 43 x W 36 x D 24 mm
12 Channels Configurable as:
[01 ÷ 04] 4 digital inputs (clean contacts)
[05 ÷ 08] 4 digital or analog inputs (for clean contacts or
temperature sensors)
[09 ÷ 12] 4 digital outputs (outputs for LED)
Digital Input - Key Features:
8 channels [01 ÷ 08] for clean contacts
Maximum length 30 m twisted wires - input [01 ÷ 04]
Maximum length 10m of twisted wires - inputs [05 ÷ 08]
Wired with 0,2 mm² - 18 cm length - inputs [01 ÷ 04]
Connection through 6-pin screw terminal - inputs [05 ÷ 08]
Blinds and shutters control
Scenarios
Supply
From the KNX bus 21 .. 30 VDC SELV power
consumption <10mA
Specific inputs
2 or 4 digital inputs for clean contacts
Maximum length 10 meters twisted cables
Specific outputs
2 / 4 outputs for driving LED - Max 0.5 mA each
Analog Input for Infrared Receiver (IRX)
These accessories must be used:
IR01A01ACC (IRX with cable and connector)
RC80A01IRC (IR remote control 8 channels)
Outputs
10 A cos 1 - 230 Vac
Max capacitance @230V: 21µF 5.000 cycles
Incandescent lamps max load: 1500W 50.000 cycles
Fluorescent lamps max load: 6 x18W 25.000 cycles
Halogen lamps max load: 500W 50.000 cycles
Gas discharge lamps max load: 200W 25.000 cycles
Analog Inputs - Key Features:
sensor with Eelectron NTC sensor (cod.TS01A01ACC
& TS01B01ACC)
Digital Outputs - Key Features:
4 outputs for driving LED 0.3 mA / channel
Use with LED Eelectron (Code LD00A01ACC /
LD00A11ACC)
Wired with 0,2 mm² 18 WNG - inputs [01÷ 04]
Heating and cooling modes
Command with HVAC mode or setpoint
2 points ON / OFF and PWM control algorithm
3-speeds fancoil control
OFF mode on window open detection
53
RC01A01IRC
IRC Device
TS01A01ACC
Temperature probe
TS01B01ACC
External
temperature probe
TS01B01ACC
External
temperature probe
IR00A01ACC
IRX Cabling
TS01A01ACC
Temperature probe
Actuators
BUILDING