Specifications
Hotel system & Access control
SUPPORT GLASS PLATE
TRANSPONDER HOLDER 2 IN - 2 OUT WITH PLEXIGLASS PLATE
Glass Plate with support for TH22A series.
This version of the product TH22A completed with plexiglass plate in the same colour of the device.
Same features of the version with glass plate.
ORDER CODES
ORDER CODES
Silver
Transponder Holder 2 IN - 2 OUT with plexiglass plate - Silver
Black
Transponder Holder 2 IN - 2 OUT with plexiglass plate - Black
White
Transponder Holder 2 IN - 2 OUT with plexiglass plate - White
VTxxA03KNX
TH22A09KNX
VTxxA13KNX
TH22A19KNX
VTxxA23KNX
TH22A29KNX
TRANSPONDER HOLDER 2 IN - 2 OUT
The Transponder Holder TH22AxxKNX is an EIB/KNX wall mounting device suitable to access control application. It can be used for
detecting and monitoring the presence of customers or service staff in a room. The device is equipped with two binary inputs (clear
contacts) that can be used, for instance, to control the door status or other signals coming from external switches/contacts (i.e. win-
dows, bathroom emergency alarms, etc..) .
On the front of the transponder holder there is a blue light that is useful to help the guest to insert card in the device. Removing the card,
after a programmable time, all the room services are switched off to preserve energy.
ORDER CODES
TECHNICAL FEATURES
Transponder Holder 2 IN - 2 OUT - Light Gray
Transponder Holder 2 IN - 2 OUT - Anthracite
Transponder Holder 2 IN - 2 OUT - White
TH22A01KNX
TH22A11KNX
TH22A21KNX
Dimensions
v(H x W. x D.) 78 x 110 x 37 mm
Mounting
Inwall mounting on squared or round boxes
Connection
EIB / KNX bus connecting terminal max 0.8 mm²
Input and output screw clamps, conductor section max. 1,5 mm
Supply
From bus KNX 21..30 Vcc SELV
Supplementary 12-24V AC/DC ± 10% , max 150mA
Input specification
2 type ON/OFF clean contacts
Max lenght of connection cable10mt
Output relay specification
Number 2 with capacity of the contact relay: 24 VAC/DC 2 A
AC1
Control elements
1 blue guiding light
1 button for ETS programming
Transformers for Access Control
PS00T10TRA
PS00T24TRA
PS00T40TRA
Codes DIN OutputSupply
2 Mod
3 Mod
3 Mod
230 VAC
230 VAC
230 VAC
12/24 VAC 10VA
12/24 VAC 24VA
12/24 VAC 40VA
TRANSPONDER ENCODER
ESUITE SOFTWARE
with a USB interface that also provide the power supply. The device is provided with a driver to allow writing and reading
functionality.
ESuite software is dedicated to the hotel management, to oversee KNX and environments for access control and alarms.
Management software and interfaced with other software. Client remote management via the Internet or Ethernet. The package
is also available with hardware version.
ORDER CODES
ORDER CODES
TECHNICAL FEATURES
TECHNICAL FEATURES
Transponder Encoder
TE00A01KNX
eSuite licences to be integrate with room/ zones
SW00D01KNX
eSuite package 5 rooms / zones (MAX 200 rooms / zones)
SW00D02KNX
eSuite additional client
SW00D03KNX
eSuite interface to management systems
SW00D04KNX
Embedded PC with eSuite - until 10 rooms - complete - 2 clients
SW01D05KNX
Embedded PC with eSuite - until 25 rooms - complete - 2 clients
SW02D05KNX
Embedded PC with eSuite - until 40 rooms - complete - 2 clients
SW03D05KNX
Embedded PC with eSuite - until 100 rooms - complete - 2 clients
SW04D05KNX
Embedded PC with eSuite - until 150 rooms - complete - 2 clients
SW05D05KNX
Embedded PC with eSuite - until 200 rooms - complete - 2 clients
SW06D05KNX
Upgrade rack PC
SW07D05KNX
Dimensions
H x W x D: 87 x 142 x 107 mm
Mounting
Placed on desk
Connection
USB type A connector
Number of rooms / common area according to
installed license.
Client workstation accordin to installed license
Using KNX functions of timing events available
Dimensions and characteristics of the Card
Complies with ISO 7810 (85.6 x 54 x 0.76 mm)
Possibility of serigraphy on both sides (on request)
Dual technology version (RFID and magnetic stripe on request)
Dimensions and characteristics of Key chains
Dimensions and Material: ABS 38 x 34 x 6 mm
Frequency: 125KHz-
Temperature: from -10°C to 50°C
Power
From the PC’s USB port: 5V - 150mA
Communication
USB 1.1
Warnings
Blue light showing running process
Generation KNX groups of objects available
Automatically import object available from ETS KNX
Automatically back up data available
Connection to the bus using Falcon library
PMS connection available
TRANSPONDER CARDS AND KEY HOLDER
ORDER CODES
Transponder Cards Blank - 50 pcs
Transponder Cards Blank - 250 pcs
Transponder Keyholder - 50 pcs
CD00A02TRC
CD00A03TRC
CD00B02TRC
4746
Actuators
BUILDING
HOSPITALITY