Specifications
THERMOSTAT 1 IN / 1 OUT
TRANSPONDER READER 2 IN - 2 OUT
TEMPERATURE PROBE 1 IN - 1 OUT
The TM11AxxKNX thermostat is an EIB / KNX device for temperature controlling applications in Home & Building Automation, and is cha-
racterized by the possibility of being mounted on inwall boxes of 2 or 3 modules, rectangular or round. It is available in a range of colours
thermostat has large LCD for displaying the current temperature or the setpoint, fan speed, summer / winter mode and the 4 operating
status. The unit is equipped with aclean contact input which can be used for a window sensor or other devices, and an output relay to
output module to control the three fan coil speeds. Control elements available to the user include two buttons for increasing or decreasing
the setpoint temperature (current setting), and two buttons for increasing or decreasing the fan speed, or stopping the fan all together.
The Transponder Reader TR22AxxKNX is an EIB/KNX wall mounting device suitable to access control application.
is required. The device is equipped with two binary inputs (clear contacts) that can be used, for instance, to control the door
status or other signals coming from external switches/contacts (i.e. windows, bathroom emergency alarms, etc..). The tran-
sponder reader is equipped also with two output relays which can be used for general purposes, typically to open the door or
turning on the courtesy light inside the room. The product provides on the front side four LEDs in order to enlighten 4 icons to
other alarms or events. The transponder reader can reads cards or keys at a maximum distance of 30mm from the front side.
Glass Plate with support for TM11A series.
ORDER CODES
ORDER CODES
ORDER CODES
TECHNICAL FEATURES
TECHNICAL FEATURES
Thermostat1 IN - 1 OUT - Light gray
Transponder reader 2 IN - 2 OUT Light gray
Silver
Thermostat 1 IN - 1 OUT - Anthracite
Transponder reader 2 IN - 2 OUT Anthracite
Black
Thermostat 1 IN - 1 OUT - White
Transponder reader 2 IN - 2 OUT White
TM11A01KNX
TR22A01KNX
VTxxA01KNX
TM11A11KNX
TR22A11KNX
VTxxA11KNX
TM11A21KNX
TR22A21KNX
VTxxA21KNX
Dimension
Dimensions: (H x W x D) 78 x 110 x 39,8 mm
Mounting
Inwall mounting on squared or round boxes
Connection
EIB / KNX bus connecting terminal max 0.8 mm²
Input screw clamp, conductor section max. 1,5 mm²
Output relay screw clamp, conductor section max. 1,5 mm²
Dimensions
(H x W. x D.) 78 x 110 x 37 mm
Mounting
Inwall mounting on squared or round boxes
Connection
EIB / KNX bus connecting terminal max 0.8 mm²
Input and output screw clamps, conductor section max. 1,5 mm²
Supply
From bus KNX 21..30 Vcc SELV
Supplementary 12-24V AC/DC ± 10% 150mA Max
Supply
From bus KNX 21..30 Vcc SELV
FEATURES Input
Number: 1 ON/OFF clean contact
Max length of connecting 10mt twisted cables
Scanning voltage Un = 12V
Scanning power In with locked contact = 1mA for channel
Capacity of the relay contact 48 Vac, 1A AC1
Control elements
1 red LED for ETS programming
Frontal warning
1 LED : Access denied /allowed
FEATURES Input
2 type ON/OFF clean contacts
Max lenght of connection cable10mt
Number 2 with capacity of the contact relay:
24 VAC/DC 2 A AC1
Thermoregolation
Hotel system & Access control
TEMPERATURE PROBE 1 IN - 1 OUT
the temperature probe with any type of design. A large LCD display on the temperature probe displays the current temperature and
setpoint, fan speeds, heating mode / cooling mode, window and CO2 status. The device has a physical clean contact input and an
output relay for general use. Control elements available to the user are two buttons to increase and decrease the setpoint tempera-
ture, a button for adjusting the fan coil fan speed, and a button for manually changing the status (comfort, standby). By pressing the
simultaneaosly the device send 1 bit command.
ORDER CODES
TECHNICAL FEATURES
Temperature Probe 1 IN - 1 OUT Light gray
Temperature Probe 1 IN - 1 OUT Anthracite
Temperature Probe 1 IN - 1 OUT White
TM11B01KNX
TM11B11KNX
TM11B21KNX
Dimension
Dimensions: (H x W x D) 78 x 110 x 39,8 mm
Mounting
Mounting: inwall mounting on squared or round boxes
Connection
EIB / KNX bus connecting terminal max 0.8 mm²
Input screw clamp, conductor section max. 1,5 mm²
Output relay screw clamp, conductor section max. 1,5 mm²
Supply
From bus KNX 21..30 Vcc SELV
FEATURES Input
Number: 1 ON/OFF clean contact
Max length of connecting 10mt twisted cables
Scanning voltage Un = 12V
Scanning power In with locked contact = 1mA for channel
Capacity of the relay contact 48 Vac, 1A AC1
THERMOSTAT 1 IN - 1 OUT WITH PLEXIGLASS PLATE
TEMPERATURE PROBE 1 IN - 1 OUT WITH PLEXIGLASS PLATE
This version of the product TM11A completed with plexiglass plate in the same colour of the device. Same features of the
version with glass plate.
This version of the product TM11B completed with plexiglass plate in the same colour of the device. Same features of the
version with glass plate.
ORDER CODES
ORDER CODES
Thermostat 1 IN - 1 OUT with plexiglass plate - Silver
Temperature Probe 1 IN - 1 OUT with plexiglass plate - Silver
Thermostat 1 IN - 1 OUT with plexiglass plate - Black
Temperature Probe 1 IN - 1 OUT with plexiglass plate - Black
Thermostat 1 IN - 1 OUT with plexiglass plate - White
Temperature Probe 1 IN - 1 OUT with plexiglass plate - White
TM11A09KNX
TM11B09KNX
TM11A19KNX
TM11B19KNX
TM11A29KNX
TM11B29KNX
TRANSFORMERS FOR ACCESS CONTROL
PS00T10TRA
PS00T24TRA
PS00T40TRA
Codes DIN OutputSupply
2 Mod
3 Mod
3 Mod
230 VAC
230 VAC
230 VAC
12/24 VAC 10VA
12/24 VAC 24VA
12/24 VAC 40VA
4342
Actuators
BUILDING
HOSPITALITY