audio analogue soundpleasure
A wide set of careful solutions inside the units and the use of selected components and cables make this an extraordinary line. Four years of continuous research based on listening tests performed under Claudio Bertini’s supervision (Claudio is one of the Audio Analogue co-founders) make the remarkable excellence of these products now available to the wider public.
The Maestro CD Player SE is not based on the development of pre-existing projects such as the other components of the SE line but has been totally built from scratch instead. The Maestro CD player SE reduces jitter problems thanks to an innovative piece of technology entirely developed by Audio Analogue. The technology uses a ”discrete components” PLL to lock the digital signal.
VERDI cento SE We believe vacuum tube technology is, even now, very valid in treating the audio signal in a preamplifier stage while leaving to solid state technology the task of the Power stage. So this has been our design philosophy: a vaccum tube preamplifier stage to take advantage of the audio properties of that technology and a solid state power stage as much “transparent” as possible. Other important innovations concern the settable Mono/Pre Out and added use functionalities and the phono stage.
Class A Integrated Amplifier SE and Class A Power Amplifier SE The Class A Integrated Amplifier SE and the Class A Power Amplifier SE come after a four year period of diligent research that Audio Analogue has been developing on the standard Class A amplifiers. The research, directed towards a perfect tuning of the units, has concerned both the selection of the passive components (with special attention paid to the capacitors) and several inner wiring strategies.
Maestro Line Preamplifier SE The Maestro Line Preamplifier SE has been developed based on the Maestro Line Preamplifier, completely renewing the power supply stage and improving the preamp section after highly accurate detailed listening tests performed on the passive components.
MAESTRO duecento SE • MAESTRO 192/24 CD PLAYER SE INTEGRATED AMPLIFIER CLASS A SE MAESTRO stereo line PREAMPLIFIER SE • INTEGRATED AMPLIFIER CD Mechanism TEAC CD-5010A Dimensions (n. 1) Weight 135 x 445 x 395 mm (5,3 x 17,5 x 15,5 ") 13,4 kg (29,5 Lbs) D/A Section CS8416 192KHz/24bit Transceiver Cirrus Logic SRC4193 192KHz/24bit Sample Rate Converter (SRC) Burr-Brown PCM1794A 192KHz/24bit DAC Burr-Brown THD+N @ 1KHz 0dBFs (n. 6) <0,001 % THD+N @ 1KHz -10dBFs (n. 6) <0,003 % Dynamic range (n.
notes note 1 note 2 Height x Width x Depth Altezza x Larghezza x Profondità (H x W x D) Attenuation 0dB, -3dB band note 4 Attenuation: 0dB A weighted reffered to 8 Ohm load nominal power 1KHz input signal, two piloted channels note 5 Band limits 0Hz-40KHz note 3 note 6 Band limits 0Hz-22KHz note 7 Maximum rms voltage output value note 8 Attenuation 0dB, -3dB band, 1Vrms output note 9 Attenuation: 0dB A weighted reffered to 200W note 10 Band limits 0Hz-48KHz note 11 Full power Bandwidth li
