User Guide

Remote control
The Cinecitta’ Processor is equipped with an intelligent remote control which has been
pre-programmed with the necessary codes to check the equipment. The codes running
the Cinecitta’ Processor are memorized in the “AV” button of the remote control. The
remote-control is able to learn the codes belonging to other 7 equipments, it is so able
to control by itself a very complex equipment: processor, DVD player, satellite receiver,
television, projector, radio, etc. In case the remote control’s batteries run off , or if you
want to use an other remote control, it is possible to use the Cinecitta’ Processor to
teach the IR codes. For that purpose the Cinecitta’ processor is equipped with an IR
emitter, hidden behind the display’s left side of the front panel.
Configuration of the Cinecitta’ processor
1818