User Guide

Opening and inspecting the package.
Open the box with extreme care to avoid harming the content. The package contains
the following items:
A Cinecitta’ Processor
A remote control
Four AAA batteries (obviously in the remote control)
A supply cable
A cable for trigger connection
This manual
A CD-Rom
Whenever some of the objects above-listed were missing, please consult your Audio
Analogue dealer.
After pulling out the smallest items, take out the equipment with extreme care.
Remove the shockproof expanded foam. If the batteries are not already in the remote
control. Open the lid of the space containing batteries of the remote control and insert
them in the correct position; close therefore the lid. It will be necessary to program
the remote control as indicated later. If the remote control is already active, the
programming will not be necessary.
Choosing the place where to position the Cinecitta’ Processor.
The Cinecitta’ Processor is an equipment generating a considerable quantity of heat.
For this reason it is advisable to place it in an environment with a good air circulation.
In particular it is appropriate to allow a sufficient surrounding and above space. (at
least 5cm), to avoid to put it close to source o f heat (radiators, amplifiers and televisions).
12