Datasheet

DANTE AVIO ANALOG DATASHEET
SPECIFICATION
ANALOG INPUT
1 CHANNEL
ANALOG INPUT
2 CHANNEL
ANALOG OUTPUT
1 CHANNEL
ANALOG OUTPUT
2 CHANNEL
Max signal level
(balanced)*
+24dBu / +4dBu / 0dBu +18dBu / +4dBu / 0dBu
0dBV /-10dBV 0dBV /-10dBV
Frequency Response
20Hz to 20kHz (-/+0.5dB) 20Hz to 20kHz (-/+0.5dB)
Impedance
20k Ohm balanced
10k Ohm unbalanced
150 Ohm balanced
75 Ohm unbalanced
Dynamic Range
> 100dB > 100dB
Signal to Noise Ratio
> 100dB > 100dB
Total Harmonic
Distortion
< 0.01% at +4dBu < 0.01% at +4dBu
Connectors
RJ45 & 1 XLR-F RJ45 & 2 XLR-F RJ45 & 1 XLR-M RJ45 & 2 XLR-M
Power
Class 1 802.3af PoE
Sample Rates
44.1, 48, 96 kHz
Bit Depth
24
Dante Device Latency
1, 2, or 5ms (congurable using Dante Controller)
Network Transport
Dante Audio over IP, AES67 RTP
Part Number
ADP-DAI-AU-1X0 ADP-DAI-AU-2X0 ADP-DAO-AU-0X1 ADP-DAO-AU-0X2
Audinate, Dante and their
logotypes are trademarks of
Audinate Pty Ltd.
All other trademarks
remain the property of their
respective owners.
Audinate products are covered
by numerous patents. See
https://www.audinate.com/
patents for details.
© 2020 Audinate Pty Ltd.
All rights reserved.
Dante AVIO Analog Marketing
Datasheet
WORLD WIDE OFFICES
[e-mail]
www.audinate.com
BUILT FOR THE ROAD
We’ve made Dante AVIO analog adapters
road-ready and tour-tough. Sonically welded
ABS enclosures and quality hardware are
used throughout, while cable assemblies
are stress-tested to ensure reliable
operation under grueling conditions. Toss
them in your toolbox, show after show.
ALL DANTE
Dante AVIO adapters are all fully functional
Dante interfaces, with all the features you’d
expect from Dante audio networking. Each
one delivers bit-perfect audio reproduction,
super-low latency and sample-accurate
synchronization across the entire network.
All Dante devices automatically discover
one another, and the entire system is
managed by our easy-to-use Dante
Controller software on any connected PC or
Mac. Most importantly, every Dante device
can connect to every other Dante device –
no questions asked.
All Dante AVIO adapters are fully
compatible with Dante Domain
Manager (DDM) for IT-level security and
management, while AES67 is supported for
connection to non-Dante networks.
COST-EFFECTIVE
We’ve worked hard to make the Dante AVIO
family of products a cost-effective addition
to any system or piece of gear, so that
everyone can enjoy the benets of Dante.
Audio networking has never been easier
to or more affordable, no matter how you
choose to use it.
DANTE AVIO ANALOG
INPUT & OUTPUT
Dante AVIO Analog Adapters allow you to
use the audio gear you already own with
your Dante network. Don’t abandon trusted
compressors, equalizers or analog power
ampliers - adapt them to the world of audio
networking with Dante AVIO.
Dante AVIO Analog Adapters are available
as balanced line-level single or dual-
channel input or output adapters, with
high-quality XLR connectors. Use the
Analog Dante AVIO Adapters to add Dante
networking to analog ampliers, powered
loudspeakers, signal processors, music
players or any other analog audio device,
for hum-free digital signal distribution
throughout your audio network. 
Audinate Pty Ltd
Level 7 64 Kippax Street
Surry Hills NSW 2010
Australia
Tel: [phone]
Audinate Limited
Suite 1106-08, 11/
F Tai Yau Building
No 181 Johnston Road
Wanchai, Hong Kong
澳迪耐特有限公司
香港灣仔莊士敦道181號
大有大廈11樓1106-8室
Tel. +(852)-3588 0030
+(852)-3588 0031
Audinate Ltd
Suite 104
Werks Central
15-17 Middle St
Brighton, BN1 1AL
United Kingdom
Tel. [phone]
Audinate, Inc
1200 NW Naito Parkway
Suite 630
Portland, OR 97209
USA
Tel. [phone]