User Manual

24
Operation with Ableton Live
If using Windows, ensure that you have
followed the installation instructions found
on page 6.
With iD4 plugged into your computer,
launch Ableton Live and head straight to:
Live > Preferences > Audio
In the Audio tab make sure that iD4 is
assigned as the playback device. you can
also select the appropriate sample rate for
your project, as well as the buffer size.
If using Windows, ensure to set the Latency
and Buffer Size in the iD System Tray before
changing it in Ableton.
If you are monitoring your inputs using
the Monitor Mix knob, then you can keep
the buffer size reasonably high to reduce
the strain on your computer. In this case,
you also need to make sure that input
monitoring is turned off on the track in
Ableton.
For more information about setting up
audio I/O refer to your Ableton Live user
manuals & documentation.
ABLETON LIVE SETUP