User Manual

22
Operation with Pro Tools
If using Windows, ensure that you have
followed the installation instructions found
on page 6.
With iD4 connected, launch Pro Tools and
ensure that a new session is created at
the desired sample rate. If you are using
Windows, make sure that you have already
set your Latency and Buffer Size settings
in the iD System Tray before opening a
project. Changing these mid session will
result in Pro Tools needing to restart.
Playback Engine
Go to Setup > Playback Engine... and ensure
that iD4 is set as the active playback
device.
Go to Setup > I/O... to label your inputs and
outputs and ensure that iD4 is correctly
reporting 2-inputs and 2-outputs to and
from Pro Tools.
If using the iD4 Monitor Mix knob to
monitor your inputs, ensure that the input
monitor button on the audio tracks are not
selected, to avoid duplicate signals.
For more Pro Tools information consult
your Avid user manuals & documentation.
PRO TOOLS SETUP