User Manual

15
Monitor Pan
iD4’s Monitor Pan feature enables you to
pan both the mic pre and DI input from left
to right, making it easy to create a balanced
headphone mix that suits you. Press and
hold the Mute and iD buttons whilst turning
the Volume Encoder to pan the inputs.
Twisting clockwise pans channel 1 left and
channel 2 right, while twisting anti-clockwise
pans channel 1 right and channel 2 left.
Pressing the encoder whilst holding the
Mute and iD button will reset the pan.
As you adjust monitor pan, the meters show
the pan positions of the mic and D.I, where
the top meter shows the Mic/Line Input,
and the bottom meter shows the D.I Input.
MUTE Speakers Button
The MUTE Speakers button is a quick way of
muting the speaker outputs whilst allowing
audio to pass to the headphone outputs,
allowing you to hear what you are playing
while you are recording.
If you are using a microphone in the same
room as your speakers, then it is important
to mute your speakers while recording to
prevent unwanted audio being picked up by
the mic or getting feedback.
HARDWARE FEATURES