User Manual

13
D.I Input
iD4 uses a discrete Class-A JFET instrument
(D.I) input on channel 2, which is easily
accessible at the front of the unit.
The D.I input is perfect for plugging in electric
or electro-acoustic guitars, as well as basses
and even synthesisers. The JFET circuitry
adds a tiny bit of colour and distortion to the
signal, giving your instruments a bit of added
warmth.
HARDWARE FEATURES
Loudspeaker Outputs
iD4 has stereo speaker outputs on the
back panel in the form of balanced TRS
jack connectors. The outputs are fed from
high quality Digital to Analogue Convertors
(DACs), sending clean, detailed audio to your
speakers.
Headphone Outputs
iD4 features a high current headphone
amplifier. This can be accessed using
both the 3.5mm and 6.35mm sockets
found on the front of the unit. The same
audio signal comes out of both connectors
simultaneously, so it does not matter which
you plug your headphones into. You can also
plug in two pairs at the same time.
Headphones can be used instead of, or
alongside speakers to get an idea how your
mix sounds on headphones, or to provide an
artist headphone mix.