Datasheet

Solo
The ASP8024 Solo system is particularly
versatile, providing PFL, AFL and Solo-in-
Place functions. The ‘Solo in Front’ feature
allows the Solo signal to be heard either in
isolation or with some of the mix signal in
the background.
Control Room
Control Room Monitor source selection
switches provide a choice between the
Main Mix and three external stereo
sources. A 30 segment peak reading led
bargraph meter follows the source
selection. The Main Monitor outputs are
supplemented by 3 sets of Alternate
Speaker outputs, each with its own
level control.
Compressor
A useful feature that would normally require
the use of an external device is a dedicated
high quality limiter/compressor, with a
dynamic characteristic optimised for final
mix processing. Switched ratio, attack and
release times as well as a program
dependent auto setting make setting up
easy and repeatable.
Sub Groups
Most in-line mixing consoles allow the
formation of sub groups, but usually at the
expense of losing a channel. To avoid this,
ASP8024 has 8 independent sub groups,
each of which has an insert point should
external processing be required. The
output of each sub group can be panned
across the mix, or even used as the record
signal to an 8 Track recorder, metered by a
20 segment peak reading led bargraph.
Stereo Inputs
To avoid unnecessarily tying up two mono
inputs for each stereo return signal
ASP8024 has a total of 4 dedicated Stereo
inputs equipped with full Multitrack/Mix
routing and solo/cut facilities. A wide range
input gain control is used to maximise the
versatility of these channels which also
have direct access to the two foldback
systems via rotary send controls.
Communications
Full communications facilities are provided
with assignments to Mix and Bus outputs
(Slate), Studio Loudspeakers and the
Foldback systems.