Technical data

Index
Technical data
Dimensions Standard/optional equipment
Explanatory notes
¹ The figure given was calculated using the specified measuring procedure (current version of UN-R 85).
² You will find specifications on the technical characteristics of tyres in the adjacent table.
³ Unladen vehicle weight includes driver (75 kg) and fuel tank 90 % full, calculated in accordance with the
current version of Reg. (EU) 1230/2012. Optional equipment may increase the vehicle’s unladen weight
and drag coefficient, whereupon the possible payload limit and the top speed will be reduced accordingly.
⁴ A vehicle’s fuel consumption and CO₂ emissions and deviations from the figures given do not just depend on
how efficiently the vehicle uses the fuel, but are also influenced by driving behaviour and other non-technical
factors. The figures given for fuel consumption and CO₂ emissions refer to each illustrated standard wheel/tyre
combination and may change if different wheel or tyre dimensions are selected. CO₂ is the greenhouse gas
primarily responsible for global warming.
⁵ We recommend using sulphur-free super unleaded RON 95 fuel complying with DIN EN 228. If this is not
available, use sulphur-free regular unleaded RON 91 fuel complying with DIN EN 228; power output will be
slightly reduced. Unleaded RON 95 fuel with a maximum ethanol content of 10 % (E10) can generally be used.
Fuel consumption details refer to operation with RON 95 fuel complying with 692/2008/EC.
⁶ We recommend using sulphur-free diesel complying with DIN EN 590. If this is not available,
use diesel complying with DIN EN 590.
⁷ The figures given were calculated using the specified measuring procedures. The figures do not refer to one
individual vehicle and do not form part of any offer, but rather should be used purely for purposes of comparison
between the different vehicle models.
Important note
Special information about the wheels: wheels with gloss turned finish as well as polished or partly polished
aluminium wheels must not be used in wintry road conditions. For manufacturing reasons, the rim surface does
not have sufficient corrosion protection for such use and can be permanently damaged by road salt or similar.
Classifications of tyre parameters
The table shows the range of fuel efficiency, wet grip and exterior noise emission classes for the different tyre sizes
of the Audi TT Coupé, TT Roadster, TTS Coupé and TTS Roadster.
It is not possible to order a specific tyre. Ask your Audi partner about the range of tyres available in your country.
Tyre size Fuel efficiency
class
Wet grip
class
Exterior noise
emission class
Summer tyres 225/50 R 17 E–C B–A 71–69
245/45 R 17 G–E C–B 72–69 –
245/40 R 18 F–E C–A 73–69 –
245/35 R 19 F–E B–A 71–70
255/35 R 19 F B 71
255/30 R 20 E A 73
Winter tyres 225/50 R 17 F–C E–C 72–68 –
245/40 R 18 F E 68