Specifications

Address: 1000 Seville Road, Wadsworth, OH 44281
Phone: [phone]
Web: www.ecstuning.com
Page -
21
B5 S4 Timing Belt Kit Installation
Step 34.
Tensioner roller note:
Your new tensioner roller ships with a plastic retaining tube on the
attachment bolt to hold it in place, and also to secure a at washer
on the back of the roller.
is washer must be installed.
Do not lose it.
Step 33.
Tensioner note:
Your new tensioner ships with a retainer pin holding the tensioner
piston in its retracted position. Do not remove this pin yet. We’ll get
to it in a minute after the timing belt is installed.
Step 32.
Install the timing belt tensioning
components on the front of the engine.
All of these parts are included in your
Ultra kit.
Torque specs in parentheses.
1) tensioner (10 Nm)
2) tensioner relay (pivot arm) (20 Nm)
3) tensioner roller (20 Nm)
4) idler wheel (45 Nm)
Quick notes:
• We always apply a few drops of
medium strength thread locker
(blue) to all of these fasteners.
• Do not pull the “grenade” pin from
the tensioner yet.