Install guide

© 2005, 2006 Lee H. NSX JR – Audi Symphony I to RNS-E Install Guide – Version 2.1 Appendix
Appendix J Screen Shot Mode
The RNS-E has a nice feature called Screen
Shot Mode that saves the current screen
image to the SD card in slot 1.
The SD card in Slot 1 must have enough free
space to store the screen shots that are
about 300KB each.
SD card slot 2 must be vacant.
To enable Screen Shot Mode, enter
Engineering Mode as described in
Appendix B. Enter the General category
and select “Screen shot mode”. This
selection will highlight to indicate the unit
is ready to save the screen images.
Screen shots may now be saved at any time and in any mode. To save a screen shot,
press and hold the “next track” button for 5 or 6 seconds until the screen flashes
black then returns to the current display.
The screenshots will be saved in .bmp format in a folder named “SCR_Shot” on the SD card.
To exit screenshot mode, return to Engineering Mode and deselect the Screen shot mode menu item.
Special thanks to S4LoneStar for originally posting this information on www.navplus.us