Install guide

© 2005, 2006 Lee H. NSX JR – Audi Symphony I to RNS-E Install Guide – Version 2.1 Page 43
This step will adapt the instrument cluster to recognize the telephone data for use in the Driver’s
Information System (DIS). This is the small red display at the center of the instruments.
See the vehicle and RNS-E owner’s manuals for information on using the DIS once this installation is complete.
Select “17-Instruments” on the Control
Module Screen.
To change the adaptation values, press
“Adaptation-10”
Do not Recode the Instruments
It could cause a malfunction.
Enter number 62 in the Channel
Number box and press “Read”.
Enter a value of 7 and press
“Save”. This value is valid to
enable the display of Radio,
Navigation, and Telephone info.
Exit back to the main VAG-COM
screen when finished.