Install guide

© 2005, 2006 Lee H. NSX JR – Audi Symphony I to RNS-E Install Guide – Version 2.1 Page 18
The last step is to get the instrument cluster adapted to recognize the radio and navigation data for use
in the Driver’s Information System (DIS). This is the small red display at the center of the instruments.
See the vehicle and RNS-E owner’s manuals for information on using the DIS once this installation is complete.
Select “17-Instruments” on the Control
Module Screen.
To change the adaptation values, press
“Adaptation-10”
Do not Recode the Instruments
It could cause a malfunction.
Enter number 62 in the Channel
Number box and press “Read”.
Enter a value of 5 and press
“Save”. This value is valid to
enable the display of Radio and
Navigation info.
See Section 4.3 for installations
that include a telephone module.
Exit back out of VAG-COM completely and disconnect the cable from the diagnostics port.
This completes the installation of the RNS-E navigation headunit.