Operation Manual
CD/SD 81
General operation RADIO, CD NAME, TEL NAV, INFO CAR, SETUP
CD Random play
CD tracks can also be played in random order.
Fig. 81 CD: Random
–Press the CD control button in the CD menu.
– By rotating the control knob, select MIX (“Random”)
Þ fig. 81.
– Press the control knob.
The possibilities for Random play depend on the different settings
available for Repeat in the Setup CD menu
Þ page 82.
If you have switched the Repeat function off in Setup CD, the CDs in
a CD changer* are played one after the other in random order. The
tracks on the current CD are first played in random order. After all
the tracks have been played, the next CD is loaded.
If you set Repeat in Setup CD for only a single CD, only the tracks on
the current CD will be played in random order.
If you have set Repeat for a single Track in Setup CD, you cannot use
random play. The Scan function also cannot be used
Þ page 81.
Scan CD tracks
Fig. 82 CD: Scanning a track
–Press the CD control button in the CD menu.
– By rotating and pressing the control knob, select SCAN
Þ fig. 82.
Pressing the control knob activates automatic track scan. Each track
on the CD will be played for a few seconds.