Operation Manual

Drives44

– Insert a CD that you want to load, label up, into the CD

tray .

If you press the button again while you are loading all CDs,

the loading process will be interrupted.

Make sure you load your CDs label side up and straight

Þ page 43, fig. 42.

The CDs should never be forced into the slot. The CD will be pulled

into the CD changer automatically.

After a CD has been loaded into the CD changer, you should wait for

a moment until the red LED on the inside side of the tray blinks. The

CD tray is then ready to be loaded with the next CD.

If you choose a slot which already has a CD loaded in it, the CD will

be ejected. Remove the CD, and insert the new CD you want to have

in this slot.

If you wait longer than 30 seconds without removing the CD, the CD

will be pulled back into the CD changer automatically.

Tips

· The CD is played through the main CD/SD function Þ page 78.

· If you have accidently inserted a CD upside down (with the label

side facing down), the Display will show a read-error-message.

· Never force the CDs into the CD tray. The CD will be pulled into

the CD changer automatically.

· Do not use any non circular CDs (for example, Shape CDs)

Þ page 49.

Applies to vehicles: with Audi cd changer

Ejecting CDs

Ejecting a CD

– Press the CD EJECT button Þ fig. 43.

– Press the button (LED on) to eject an individual CD, or

– Press the CD EJECT button again to eject the CD you

are playing.

Ejecting all CDs

– Hold down the button for more than two seconds. All

CDs that are currently in the CD changer will be ejected.

Note

· Always keep your CDs in their original cases to protect them

from dirt, dust, scratches or other damage.

LOAD

Fig. 43 Audi cd

changer: Ejecting CDs