Operation Manual

Drives 43

General operation RADIO, CD NAME, TEL NAV, INFO CAR, SETUP

CD changer

Applies to vehicles: with Audi cd changer

Loading your CDs into the CD changer

Loading just one CD

– Press the button . As soon as the CD changer

is ready for you to load a CD, the red LEDs on the inside

sides of the CD tray (not shown in the illustration)

start to blink.

– Insert the CD (printed side up and straight) into the CD

tray . The CD automatically loads into the next free slot

in the CD changer. The LED in the button will stop

blinking.

Loading all CDs

– Press and hold the button for longer than 2

seconds.

– Wait until the red LEDs on the inside sides of the CD tray

(not shown in the illustration) start to blink.

– Now insert your other CDs (printed side up and straight)

one at a time into the CD tray . The LEDs in each button

will stop blinking once a CD has been loaded into the

slot.

Loading the CD into a specific empty slot

– Press the button . The LED in the button of

any empty slot will start to blink.

– If you want to load a CD into a specific slot, you can also

press a button , where the LED is not lit and insert your

CD.

– Wait until the red LEDs on the inside sides of the CD tray

(not shown in the illustration) start to blink.

– Now insert your CDs (printed side up and straight) into

the CD tray .

Loading the CD into a specific slot

– Press the button . The LEDs in the buttons

for the slots that already have CDs loaded blink.

– If you press an illuminated button that is not blinking

then that CD will be ejected.

– Remove the ejected CD from the CD tray .

Fig. 42 Audi cd

changer: Loading CDs

LOAD