Operation Manual

Drives36

Loading navigation DVD

– Press the button to open the display.

– Hold the navigation DVD by the hole in the center and the

outer edge Þ page 51, fig. 52.

– Guide the navigation DVD straight (label side up) into the

drive . The navigation DVD is pulled in automatically.

Before inserting the navigation DVD, check to make sure there is no

DVD/CD already in the drive. If there is a DVD/CD in the drive, push

the Eject button and remove the DVD/CD

Þ page 37.

The navigation DVD should never be forced into the drive. The navi-

gation DVD is pulled in automatically.

If you are shown the message Please check navigation DVD in the

display, you cannot use the Navigation function. Possible reasons

are described starting on

Þ page 51.

If you are shown the message Navigation is being initialized in the

display, navigation is in the start phase. As soon as this message

disappears and a navigation menu is displayed, you can use the

navigation feature.

Tips

To ensure problem-free operation, you should use only a clean,

unscratched and undamaged navigation DVD. You can find addi-

tional hints starting on

Þ page 48.

Fig. 33 Display open:

DVD navigation drive

Fig. 34 Display open:

Inserting navigation

DVD into the drive