Operation Manual

General system operation20
Home function
If you activate the function button within a main function, the
system will automatically jump to the main menu of that main func-
tion.
In Navigation “Home function” depends on the route guidance
selected: If you have activated route guidance with stopovers, you
go to the menu for route planning by pressing the function button
again
Þ page 139, fig. 146. If you have activated route guidance
without stopovers
Þ page 139, you go to the main navigation menu
(singe destination mode) by pressing the function button again.
History function
The system recalls the previous settings.
When a function button is pressed, the system will switch to the
most recently accessed menu level for the specific main function.
This includes any sublevels that were opened. This excludes Setup
menus.
The history memory is erased when the system moves into standby
mode.
An example: You are currently on the Tuning radio menu and switch
to the navigation menu by pushing the button. If you press
the button at this time, you will not jump to the main radio
menu, but directly to the Tuning radio menu.
Start Navigation System Reset
The following process will restart your Audi Navigation
System and will allow complete functionality sytem to be
restored.
– Press the ON/OFF knob to switch the Navigation System
off.
– Press and hold the ON/OFF knob until the display reap-
pears and turns black.
– Release the ON/OFF knob as soon as the display has
turned black. After a few seconds, the Navigation System
begins its restart, or you can switch it on manually
Þ page 11.
NAV
FM-AM
Fig. 15 Navigation
System ON/OFF knob