Operation Manual

Navigation (NAV)148
Map position menu
Fig. 156 Navigation: Map position
Fig. 157 Navigation: Map position menu
–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu.
– Rotate the control knob to the third menu item
Þ fig. 156.
– Press the control knob.
– Select Detail info, Set as destination, Set as stopover or
Save to directory.
You can set the point marked at the time by the crosshairs as a desti-
nation or stopover, or save it to the directory. If additional detailed
information is available for the selected point on the map, you can
display it using the Detail info function.
You can also specify a new point on the map by moving the
crosshairs
Þ page 149. This new point can then be Set as
destination, Set as stopover or you can Save in directory.
You can use the Set as stopover function if you have entered “Route
with stopovers”
Þ page 139.