Repair manual
Installation InstructionsBluetooth Gateway 07
1.7 Functional test and nal tting
• Check the function of the Integrated Bluetooth Hands-Free Phone
System by pairing a mobile telephone to the system (Bluetooth ID is
BT Gateway, PIN code is 1234) and then make a call. End the call via
the Multi Function Steering Wheel.
• Test the answering function by calling the paired mobile telephone
from another phone and answering using the Multi Function Steering
Wheel.
• While on the call test the microphone and the speaker system (make
sure you can hear the caller and that they can hear you)
• While the mobile telephone is paired, turn the ignition off and remove the
key. The mobile telephone should disconnect from the Bluetooth system.
Leave the ignition off for 30 seconds and then switch it back on. The
mobile telephone should re-connect with the system within 90 seconds.
• If the vehicle has an RNS-E head unit or is an A4/A5/Q5 with Con
-
cert3 or Symphony3 please ensure that the phone operating console
is displayed on the screen when the PHONE button (on the radio
control panel) is pressed.
•Rettheradio/radionavigationunitandallothertrimpanelsthat
were removed. (refer to the vehicle repair manual)