Repair manual

Installation InstructionsBluetooth Gateway 05
Head Unit Coding
The following head units require coding, if not listed here they do not
need coding.
• RNS-E Head Unit
Address 56 (Radio)
0XXX?XX- Digit marked ? Has to be changed to 7
The RNS-E head unit need to have a software index of at least 350.
RNS-E RESET After coding you need to complete a RESET of the head unit.
Please turn the device off. When the head unit is turned back on keep
the ON/OFF button held down for 45 seconds until the head unit resets.
• Concert 2+, Symphony 2+
Address 56 (Radio)
0?XXXXX- Add 4 to the existing value of ? (e.g. 3 to 7)
• Concert 3, Symphony 3 – only for A4 8K, A5 8T, A5 8F, Q5 8R
Address 56 (Radio)
-Select Coding
-Select master
-Select Byte 3
-Change value of Byte 3 from 10000000 to 10000010
Address 47 (Sound system)
- only for A4 8K, A5 8T, A5 8F, Q5 8R with B&O sound system
-Select Byte 3
-Set Bit 0 to 1
-Set Bit 1 to 0