Repair manual

Installation Instructions Bluetooth Gateway

1.5 Microphone Installation

• Please see Section 1.9forvehiclespecicMicrophonemountingpositions.

• Clean surface that the microphone is to be mounted to with alcohol

and clean towel.

• Once the Microphone is mounted in the correct position, route the

cable to the Bluetooth ECU location.

• Secure the microphone cable using the supplied cable ties within the

dashboard to the existing wiring/wiring looms.

• Connect the microphone plug to the Bluetooth ECU 2.5mm

microphone socket.

• Bundle any spare microphone cable together and cable tie to the

Vehicle interface loom.

1.6 Coding the vehicle for Telephone

• Connect a vehicle diagnosis, measurement and information

system to the vehicle.

• Select the operating mode “Self Diagnosis”

NOTE: ‘X’ denotes digits in the coding which vary depending on the vehicle