Repair manual
Installation InstructionsBluetooth Gateway 03
1.2 Mounting the Bluetooth ECU
• Clean the underside of the Bluetooth ECU with a clean towel and
alcohol,andthenattachdoublesidedxingtapetotheundersideof
the Bluetooth ECU.
• Mount the ECU with the sockets facing upwards (if ECU is to be mounted
vertically) so that the plugs cannot fall out.
• Please see pictures
Section 1.8forvehiclespecicECUmounting
positions.
1.3 Routing the Vehicle Interface Loom
• Route the QUADLOCK Plug/Socket end of the Vehicle Interface Loom
from behind the head unit to the location of the Bluetooth ECU.
• Secure the Vehicle Interface Loom using the supplied cable ties within
the dashboard to the existing wiring/wiring looms.
1.4 Connecting the Vehicle Interface Loom
to the Radio/Radio Navigation unit.
• With the Radio/Radio Navigation unit removed, connect the socket
side of the Vehicle Interface Loom to the plug that usually connects to
the radio/radio navigation system.
• Connect the plug side of the vehicle interface loom to the radio/radio
navigation unit.