Operation Manual

Audi connect (vehicle) services on myAudi
– Select the air conditioning type ()
1)
.
You can activate the air conditioning in the vehi-
cle immediately or program a timer.
Starting air conditioning immediately
Click on Start immediately.
Programming a timer
– Click on the

symbol.
– Enter the air conditioning time you require.
– Click on Save.
– Mark an entry (

).
– Click on Send change to vehicle.
Note
The air conditioning always runs according to
the temperature set in the vehicle; it is not
possible to change the temperature via the
Audi MMI connect app.
Car Finder
You can have the location where your vehicle was
most recently parked displayed on the map.
Important:
You must be the primary user/a user of the vehi-
cle selected
ð
page 15.
►
Click on Switch on now to activate the service
for the first time.
The following information is displayed on the
map:
–
Parking position as a marker pin for your vehi-
cle on the map
– Location information with available informa-
tion (e.g. street and town)
Deactivating service
If you no longer want to transfer your vehicle's
parking position, you can switch the service off at
any time.
– Click on Switch service off.
Audi service request
You can have your personal Audi Service Partner
remind you of upcoming service appointments.
Important: You must be the primary user of the
vehicle selected
ð
page 15 and must have speci-
fied your personal Audi Service Partner
ð
page 21.
As soon as a service is due for your vehicle, the
relevant vehicle data will be sent directly to your
Audi Service Partner. Your dealer will then call or
e-mail you with suggestions for when an appoint-
ment could be made.
In addition, all necessary data from your vehicle
will be sent to the Service Partner so that your
workshop visit can be planned optimally.
1)
Applies to vehicles with auxiliary heating
19
AMH012720EA