Operation Manual

Audi connect (vehicle) services on myAudi
Audi connect (vehicle)
services on myAudi
Introduction
You can use the Audi connect (vehicle) services to
call up information on your vehicle and/or oper-
ate some functions remotely using your myAudi
account or mobile devices (e.g. smartphones).
►
Click on
4
Audi connect
ð
page 2, Fig. 1 in the
upper navigation bar.
►
Click on Display available services next to the
relevant vehicle.
►
Click on the Audi connect (vehicle) service you
wish to use.
The following Audi connect services
1)
are cur-
rently available (these may vary according to ve-
hicle model and equipment):
– Remote locking/unlocking
– Remote auxiliary heating
– Vehicle status report
– Car Finder
– Trip data
– Remote charging
– Remote air conditioning
Note
–
This manual describes the Audi connect (ve-
hicle) services offered on the myAudi plat-
form at the time of going to print. Some of
the contents described here will not be
available until a later date, or may only be
available in certain markets or for certain
vehicles.
– The Audi MMI connect app is required to
control some Audi connect (vehicle) services
remotely. This can be found in your App
Store.
Audi connect user
management
Setting the primary user
You can remotely operate or activate certain
functions in your vehicle via your myAudi ac-
count. However, it is necessary to register as the
primary user of the vehicle to use these Audi con-
nect (vehicle) services due to their security impli-
cations.
Important: You must not already be registered as
the primary user.
►
Click on
5
Audi connect user management
ð
page 2, Fig. 1 in the upper menu bar. Or:
►
When you have selected a service, click on To
Audi connect user management.
Depending on the vehicle, you may need to fill in
the following data:
Personal data
– Click on Verify now.
– Fill in the form and select a verification meth-
od.
– Click on Confirm.
– Your personal data will be displayed again so it
can be checked. Click on Confirm again.
Setting a PIN
It is necessary to set a PIN to remotely control
some Audi connect (vehicle) services and for cer-
tain myAudi requests which are relevant to your
security.
– Enter a 4-digit PIN.
– Repeat the PIN.
– Click on Confirm.
Terms and conditions
– Accept the primary user conditions for using
the vehicle related Audi connect services.
– Click on Confirm. 
1)
Still under development at the time of print. The availabil-
ity of the services offered depends on your country and is
time-limited.
15
AMH012720EA