User's Manual

Heating and cooling 97
Controls Safety Driving tips General maintenance Self-help Technical data
The blower speed will be shown on the MMI display ⇒ page 96,
fig. 110 for a few seconds if the MMI is switched on.
Note
• The blower speed may change automatically. This ensures that
the selected temperature is reached as quickly as possible.
• The blower speed cannot be regulated separately for the driver
and front passenger sides of the vehicle.
Applies to vehicles: with deluxe automatic air conditioner
Air recirculation mode
The air recirculation setting prevents fumes etc. from
entering the interior.
Switching on the air recirculation mode
– Press the button ⇒ .
Switching off the air recirculation mode
– Press the button again, or
– Press the button, or
– Press the button.
In this setting, the air is drawn from the interior of the vehicle,
filtered and continuously recirculated. We recommend using the air
recirculation mode in the following circumstances:
When driving through a tunnel or in queues of traffic, to prevent
fumes entering the interior of the vehicle.
WARNING
For reasons of safety you should not leave the air recirculation
switched on for too long. This mode prevents fresh air from
entering the vehicle, so the windows can mist over if the air
cooling is switched off. Bad visibility can cause an accident.
Applies to vehicles: with deluxe automatic air conditioner
Air distribution
The automatically programmed air distribution can be
altered manually if required.
– Press the button for Distribution .



AUTO


Fig. 111 Air distribu-
tion button and rotary
control
Fig. 112 MMI display:
Air distribution

document_0900452a8179700c.book Seite 97 Donnerstag, 22. März 2007 10:19 10