User's Manual

Seats and storage 73

Controls Safety Driving tips General maintenance Self-help Technical data

Adjusting head restraint height

– Press switch up or down.

Extending or shortening the thigh support*

– Lift the control below the seat cushion. The front seat

cushion will spring forward.

– Slide the seat cushion back to the desired position.

WARNING

• Never adjust the driver's seat when the vehicle is moving - this

could lead to an accident.

• The electrical seat adjustment also works when the ignition is

off and when the key is not in the ignition. To avoid accidental inju-

ries, never leave children unattended in the vehicle.

• Be careful when adjusting the seat height. Careless or uncon-

trolled use of the height adjustment can cause injuries.

• Do not drive with the backrests of the front seats reclined too

far as otherwise the seat belt and airbag could fail to restrain the

wearer properly in an accident, possibly leading to injury.

Applies to vehicles: with electric seat adjustment

Easy-entry function

The easy-entry function gives improved access to the rear

seats.

Tipping the front backrests forward

– Pull up the lever ⇒ fig. 75.

– Tip the backrest forward and down.

Moving the front seats forward

– Press and hold the switch until the seat reaches the

desired position.

Moving the front seats back

– Press and hold the switch until the seat reaches the

desired position. The seat will stop automatically when it

has moved back to its original position.

The front backrests can be tipped forward for easier access to the

rear seats (the head restraints will be retracted automatically). At

the same time, the front seats can also be moved forwards and

backwards as required.

Fig. 75 Driver's seat:

easy-entry controls

document_0900452a8179700c.book Seite 73 Donnerstag, 22. März 2007 10:19 10