User's Manual

Seats and storage 71

Controls Safety Driving tips General maintenance Self-help Technical data

Adjusting height of lumbar support*

– Press the top or bottom part of the adjuster switch to

move the lumbar support upwards or downwards as

required.

Raising or lowering the seat

– Pull the lever ⇒ page 70, fig. 72 up or down repeat-

edly (i.e. pump the lever).

Adjusting backrest angle

– Lean forwards to take your weight off the backrest.

– Turn the adjuster wheel ⇒ page 70, fig. 72 to set the

angle of the backrest as required.

WARNING

• Never adjust the driver's seat when the vehicle is moving - this

could lead to an accident.

• Be careful when adjusting the seat height. Careless or uncon-

trolled use of the seat adjustment can cause injuries.

• Do not drive with the backrests of the front seats reclined too

far as otherwise the seat belt and airbag could fail to restrain the

wearer properly in an accident, possibly leading to injury.

Applies to vehicles: with manual seat adjustment

Easy-entry function

The easy-entry function gives improved access to the rear

seats.

Folding down backrest and moving front seats

forwards

– Pull up the lever ⇒ fig. 73.

– Keep holding the lever and fold down the backrest.

– Let go of the lever and push the seat forwards.

Moving front seat back and returning backrest

to an upright position

– Push the front seat back before you return the backrest to

an upright position. Otherwise, it will not be possible to

move the seat back to its original position.

WARNING

Before you drive off, always make sure the front seats are upright

and securely locked in position.

Fig. 73 Driver's seat:

Lever on backrest

document_0900452a8179700c.book Seite 71 Donnerstag, 22. März 2007 10:19 10