User's Manual

Lights and vision 69
Controls Safety Driving tips General maintenance Self-help Technical data
Applies to vehicles: with digital compass
Setting the correct compass calibration zone
The correct compass calibration zone must first be set
before the compass can give an accurate reading.
Fig. 71 Map of compass calibration zones
– Press and hold button ⇒ page 68, fig. 70 until the
currently set zone number is displayed on the interior
mirror.
– Press button repeatedly until the correct zone number
appears. The adjustment mode will be ended automati-
cally after a few seconds.
Applies to vehicles: with digital compass
Calibrating compass
The compass must be re-calibrated if the display is incor-
rect or inaccurate.
– Press and hold button until the letter C appears in the
interior mirror.
– Drive in a circle at a speed of about 10 km/h until a point
of the compass is displayed in the interior mirror.
WARNING
Calibrate your compass at a location where there is no traffic so
that you do not endanger yourself or other road users (accident
risk).
A
A
A
A
A
A
document_0900452a8179700c.book Seite 69 Donnerstag, 22. März 2007 10:19 10