User's Manual

Fuses and bulbs 283
Controls Safety Driving tips General maintenance Self-help Technical data
– Use a clean cloth to remove any fingerprints from the
glass part of the bulb.
– Insert the bulb carrier into the headlight.
– Fit the cover and swivel the retaining clip downwards.
– Install the headlight ⇒ page 278.
– Check whether the new bulb is working.
Changing bulb for front fog lights
Preparations
The description for changing the bulb refers to the left fog
light; in principle the same procedure applies to the right
fog light.
– Switch off the ignition and the lights.
– Detach the trim cover ⇒ fig. 269 (pull it carefully in the
direction of the arrow).
– Remove the two securing screws ⇒ fig. 270 and pull the
fog light unit out of the bumper.
– Unplug the electrical connector.
Caution
The trim cover is secured to the bumper by several retaining hooks.
Do not use force when removing the trim cover to avoid damaging
it.
Changing bulb
– Turn the bulb holder anti-clockwise ⇒ page 278 and take
it out of the fog light housing.
Fig. 269 Trim cover for
fog light
Fig. 270 Screws
securing fog light
Fig. 271 Front fog
light: Bulb holder is
highlighted
document_0900452a8179700c.book Seite 283 Donnerstag, 22. März 2007 10:19 10