User's Manual

Heating and cooling106
Applies to vehicles: with deluxe automatic air conditioner plus
Air recirculation mode
The air recirculation setting prevents fumes etc. from
entering the interior.
Switching on the air recirculation mode
– Press the button ⇒ .
Switching off the air recirculation mode
– Press the button again, or
– Press the button, or
– Press the button.
In this setting, the air is drawn from the interior of the vehicle,
filtered and continuously recirculated. We recommend using the air
recirculation mode in the following circumstances:
When driving through a tunnel or in queues of traffic, to prevent
fumes entering the interior of the vehicle.
WARNING
For reasons of safety you should not leave the air recirculation
switched on for too long. This mode prevents fresh air from
entering the vehicle, so the windows can mist over if the air
cooling is switched off. Bad visibility can cause an accident.
Applies to vehicles: with deluxe automatic air conditioner plus
Air distribution
The automatically programmed air distribution can be
altered manually if required.
– Press the button for Distribution .
– Turn the rotary control to the desired setting.
You can use the air distribution setting to select the air outlets you
wish to activate. In setting  all the air is directed to the windows,
in setting  the air is directed to the driver (or passenger), and in
setting  to the footwells. In addition to this there are several other
possible combinations, allowing you to adjust the air distribution to
suit individual requirements.



AUTO


Fig. 121 Air distribu-
tion button and rotary
control
Fig. 122 MMI display:
Air distribution

document_0900452a8179700c.book Seite 106 Donnerstag, 22. März 2007 10:19 10