Self-Study Program

51
Glass section 1 can be operated using the rotary switch for the sliding sunroof in the front overhead module.
Glass section 3 can be operated using the tilt sunroof button 1 E582 in the front overhead module and tilt
sunroof button 2 E583 in the rear overhead module operating unit E467. Automatic opening/closing mode is
activated by briefly pressing the button. Manual opening/closing mode is activated by holding the button
down.
The front roof section can be tilted up by pressing the rotary switch. To be able to do this, the rotary switch
must be in the 0 position. To close the tilted-open roof section, the rotary switch must be pulled down.
The front roll-up sun screen can be operated with sunroof roller sun blind button 1 E584 and sunroof roller
sun blind button 2 E585. Briefly pressing the button activates automatic opening/closing mode and holding
the button down activates the manual opening/closing mode.
Tilt sunroof button 2 E583 and the sunroof roller sun blind button 2 E585, which are located in the rear
overhead module operating unit E582, can be deactivated using the child lock. For further operating
instructions, please refer to the Audi Q7 Owner's Manual.
Function diagram
364_055
Sliding sunroof
control unit
J245
Rear sliding sunroof
control unit
J392
Sunroof roller blind
control unit
J394
Roof electronics
control unit
(with control switches)
J528
Rear overhead module
operating unit
E467
LIN
Convenience system central
control unit 2
J773