Self-Study Program

43
Outputs
– Brake and tail lights in bumper, left
– Brake and tail lights in bumper, outside left
– Brake and tail lights in bumper, inside left
– Turn signal in bumper, left
– Turn signal in tailgate, left
– Brake and tail lights in bumper, right
– Brake and tail lights in bumper, outside right
– Brake and tail lights in bumper, inside right
– Turn signal in bumper, right
– Turn signal in tailgate, right
– Centre brake light
– License plate light
–Boot light
– Footwell lights, rear left
– Footwell lights, rear right
– Fuel tank cap release motor
– Rear window defroster relay
– Supply cables in the power latching motor
– Tailgate lock unlocking motor
– Wake-up signal for the adaptive suspension control unit J197 (if a vehicle door has been opened)
– Wake-up signal for the engine control unit
Bidirectional lines
– High and Low CAN bus lines of the convenience CAN bus
– LIN bus line to alarm horn H12 and interior monitoring sensor G273
Inputs
– Microswitch for power latching system position information
– Brake light switch
– Softtouch in the tailgate
– Glass break detector for anti-theft alarm system (left and right side windows and rear window)
– Crash signal from airbag control unit
– Flashing light as confirmation of successful programming of the multipurpose garage door opener
– "Brake light on" is requested by the ABS control unit J104 due to an ACC braking operation
– Tailgate closed microswitch