Self-Study Program

The Audi Q7 stands for 100% premium-quality electronics!
There has been an enormous increase of the number of electronic control units over the past few years.
The majority of innovations made are only possible thanks to increasingly sophisticated electronics. Without
this development, many of the in-car comfort features which today are taken for granted would not be viable.
To keep pace with the increasing complexity of new vehicles, continuous learning is essential. The Self-Study
Programmes by AUDI are an efficient advanced learning tool as they enable you keep abreast of technical
developments.
Into the lead: With design & performance
Self-Study Programmes on the Audi Q7
SSP 326 Audi A6 ´05 Electrical System
–Networking
–Bus Topologies
– Convenience Electronics
– Infotainment
Order number: A04.5S00.09.20
SSP 375 Audi Q7 - New Driver Assist Systems
– Lane Change Assist (LCA)
– Optical Parking System (OPS)
– Rear-View Camera
Order number: A05.5S00.21.20
SSP 344 - The New Audi A6 Avant ‘05
–Body
– Occupant Protection
–Engine
– Running Gear
–Electrical System
– Infotainment
– Convenience Electronics
Order number: A05.5S00.13.20
Self-Study Programme 364 introduces you to the
network topology of the Audi Q7, and provides you
with an overview of the positions in the vehicle in
which electrical components are located. In addition
to obtaining service-related information on the
control units, you will learn the installation location
of each control unit and become familiar with its
tasks. You quickly and efficiently gain an insight into
the electronics in the Audi Q7.
364_029
To be able to offer customers with this diversity of
functions and equipment options, a multiplicity of
different electronic control units are required in the
Audi Q7. The control units do not work separately as
independent nodes, rather they are interconnected
via efficient bus systems. Depending on the
quantity of data to be exchanged, the MOST bus, an
optical data bus, a CAN bus or a LIN bus is utilised.
Data is also exchanged across the various bus
systems. A separate control unit provides the
interface between the various systems. Each control
unit is therefore supplied efficiently with the
information and vehicle operating variables which
its requires for optimal functioning.
364_006
SSP 287 - Audi A8 ‘03 Electrical Components
–Bus Topology
– Control units
Order number: 000.2811.07.20
SSP 288 - Audi A8 ‘03 Distributed Functions
–Bus Topology
– Distributed Functions
Order number: 000.2811.08.20