User Manual

How to use VDS-PRO on the 1990-94 Cabriolet SRS Control System.
1. Start the VDS-Pro program.
2. Click once on the version number. (i.e. click on 2.0.9)
3. A window will open allowing you to manually enter the controller address number.
4. Enter 57 for the Cabriolet SRS controller and click on SEND ADDRESS.
5. You will now be able to read and reset the Diagnostic Trouble Code (DTC).
Procedure After Restoring Electrical Power
1999 and later vehicles.
The following procedures are abbreviated. If necessary, complete instructions can be
found in the appropriate Repair Manuals.
For vehicles equipped with Immobilizer, the Key code is maintained when power is
interrupted for any reason. Therefore, recoding the key/instrument cluster is not required.
-- Check all systems for stored DTC’s.
-- Make appropriate repairs, if necessary.
-- Clear DTC memory, if DTC’s were found.
-- Set engine basic settings (Electronic Throttle Control Adaptation).
-- Set transmission basic settings.
-- Set Climatronic, power window, and power seat adaptation.
-- Check Readiness code and set.
-- Reset clock and radio anti--theft code.
Baum Tools Unlimited Inc.
800-848-6657 Main Office
415-566-9229 Tech Support
Visit our website at http://www.baumtools.com
Email: [e-mail]
[e-mail]