Self-Study Program

26
SSP239_020
Sheet metal parts
Cast parts
IHF extruded sections
non-IHF
Internal high pressure metal forming IHF
Bonding techniques
Process sequence: IHF and bending
The high degree of design freedom in terms
of the cross-sectional geometry of extruded
profiles makes it possible to optimise
components in terms of shape, function and
weight.
IHF formed roof frame on the A2
The required tolerances of +/– 0.2 mm can
only be achieved by IHF.
Subsequent processing stages are not
required.
This process makes it possible to produce the
roof frame as a component with different
cross-sections.
SSP239_030